Daj cynk
Reklama

Aktualności

IWA 2018: King Arms and Bolt Airsoft

Aktualności, 14.03.2018, h. 07:20, dodał: Regdorn , autor: Egzul & Fishbonee
4

Take a look what was presented this year at the booths of KA and Bolt Airsoft during the IWA 2018 fair.



First we went to the booth of King Arms company:

 

IMG_0620.jpg

IMG_0628.jpgIMG_0624.jpg

 

The display contained gas powered pistols from the 1911 family, both with and without a RIS rail.

 

IMG_0625.jpgIMG_0626.jpgIMG_0627.jpg

 

Apart from the 1911 the Hi-Capa pistols were also on display.

 

IMG_0631.jpg

 

This was not the end of handguns made by KA. The visitors could familiarize themselves with Single Action revolvers loaded from the side of the drum. They are made of steel. Unfortunately, they do not have any hop-up adjustment. There were also metal revolvers present, with 3 different barrel lengths, which are powered by CO2Similarly to the SA revolvers, they also do not have any hop-up adjustment.

 

IMG_0636.jpgIMG_0637.jpg

 

On the wells the series of Ultra Grade replicas was showcased, which consists of 3 new carbines, the so called entry level - made of polymer. One of them is powered with magazines typical for the 9 mm caliber. Inside we will find a MOSFET circuit, a 6,05 mm inner barrel and the set comes with a mid-cap magazine.

 

IMG_0638.jpgIMG_0639.jpgIMG_0640.jpgIMG_0645.jpg

 

Then we went to the booth of Bolt Airsoft, where we saw many interesting designs.

 

IMG_0706.jpgIMG_0711.jpg

 

The biggest attraction was a prototype of the AKS-74U replica with an EBB system with produces considerable recoil. The receiver has been made of steel and the pistol grip has been of bakelite, with is a nice accent. Inside is a modified V3 gearbox with a port for the EBB system. It is also attached to the receiver using two additional screwes. The hop-up chamber is made of metal and the inner barrel has a diameter of 6.00(!) mm. The replica can be switched to a non-blow back mode after the bolt carrier is set in the real position. The product will be available in May and its price will be 350 USD.

 

 

IMG_0712.jpgIMG_0714.jpgIMG_0718.jpgIMG_0720.jpgIMG_0722.jpgIMG_0723.jpgIMG_0724.jpgIMG_0726.jpgIMG_0727.jpgIMG_0728.jpgIMG_0729.jpgIMG_0730.jpgIMG_0731.jpg

IMG_0739.jpgIMG_0732.jpgIMG_0733.jpg

 

New models from the SWAT series have also been presented. Those were the MP5 replicas in the SD5 and SD6 versions. They differ from each other with the stock mounted with the length of the silencer. Inside them is an EBB system that is very similar to the ones used in the AKS-74U replica and an inner barrel that is 6.00  mm in diameter.

 

IMG_0734.jpgIMG_0736.jpg

Ocena wszystkich (brak, głosów: 0)

  • Dodaj do:
  • Facebook

Komentarze

Przejdź na koniec listy komentarzy
thewojtz 14.03.2018, h. 12:14 thewojtz
3500 dolarów?
The-Naturat 14.03.2018, h. 21:21 The-Naturat
Pomylili się o jedno 0 ?
SHOGUN_YAMATO 15.03.2018, h. 22:50 SHOGUN_YAMATO
Lufa 6.00mm - nie widzę tego. Większość kulek będzie się tam ciąć jak tylko jakiś brud czy nawet kurz/pył się do lufy dostanie :/
od niedawna mam lufę EDGI 5,98mm - jak na razie żadnych zacięć na kulkach G&G 0,30g. Byłem z tą lufą na chyba 4 strzelanach... IMHO trochę dramatyzujesz :P
Arczi85 16.03.2018, h. 19:10 Arczi85
Przejdź na początek list komentarzy

Aby dodawać komentarze musisz być zalogowany.


Wyświetleń: 1519

Polecamy

Sponsorzy

Action Army (silver sponsor)
Modify (silver sponsor)
Specna Arms (silver sponsor)

Imprezy patronowane

Survival Force Expo 2018
Reklama

Artykuły

Reklama

Wspierają nas

Sklepy:
Gunfire.pl

Współpracujemy


Media:
airsoftnews
equipped
miekkopowietrzni
Przegląd Strzelecki - Arsenał

Lokalne środowiska:
weekend-warriors
kpasg
rus-mil

Wydawnictwa

Nawigacja

Najczęściej poruszane